S-LINX 1.27 D
Pitch 1.27 mm

Connector system

S-LINX 1.27 D

Description of system

Connector system

  • Direct connector
  • Pitch 1.27 mm
  • Compact design
  • Simple and parallel contacting of all inserted wires by pre-assembled cover
  • KOSHIRI-security possible
  • Polarization and coding options
  • PCB contacting on both sides
  • Designed for FR4 PCBs
  • Active locking between plug and PCB
  • Sensible stop during insertion
  • Double insulation displacement terminal for high contact safety
  • Fork spring contact system
  • 90° cable outlet upward or downward

Technical data

Mechanical
Pitch 1.27 mm
Positions 2 - 8
Termination IDC / double ID terminals
Cable type discrete wire / ribbon cable
Wire size 0.22 mm² to 0.35 mm² discrete wire
Wire outer diameter ≤ 1.3 mm
Hardness of insulation max. Shore D 65
Type of wire stranded or solid
Operating temperature -40 °C ... +150 °C
Protection class IP00, unsealed
PCB thickness 1.6 mm ± 0.14 mm
Insert cycles 5
 
Electrical
Rated current 3 A at TUmg. 100 °C
4 A at TUmg. 95 °C
with 0.35 mm²
Rated voltage 50 V (IEC 60664 / Grad 2)
Dielectrical strength 0.5 kV
Insulation resistance >103
Contact resistance < 10 mΩ
Air gap and creeping distances ≥ 0.6 mm
Surge category II
Tracking resistance CTI ≥ 600
Insulation group I
Approvals VDE
UL / ULC
Based on LV 214
Based on USCAR2 (*planned)
Life test 4.000 h (Domestic appliances cycle)
 
Material
Contact Cu-Alloy
Contact finishing Sn, Ag
Connector, Cover and housing PA-GF, glow wire resistant, GWT 750°C acc. to IEC 60335-1, UL 94V-0
Colour of housing black or natural

IDC housings

© 2020 STOCKO CONTACT