Description of system

ECO-TRONIC FB is a connector system that is suitable for classic FR4 printed circuit boards with a reduced PCB thickness of 1 mm.
The requirements of various fields of application, in particular the automotive industry, were taken into account in the design layout.
The performance profile makes this series particularly suitable for applications in the areas of LED lighting and display contacting.
It is also suitable for applications such as contacting sensors and actuators.
The contact layout guarantees electrically and mechanically stable contacting between the contact and the wires with a cross section of 0.22 mm² and 0.35 mm².
Protection against mismating by means of polarising elements and mechanical locks against contact damage when misplacing ensure the quality of the connection in handling and in the application.
In addition, automatic processing of the connectors ensures high quality standards throughout the entire production process.

IDC housing

  • Direct connector IDC
  • Pitch 2.5 mm
  • Interface according to RAST 2.5
  • Lock between plug and PCB
  • Premounted contacts
  • Cable exit 90°
  • Wire size 0.22 and 0.35 mm²
  • For board thickness 1 mm

Technical data

Mechanical
Pitch 2.5 mm
Positions 2 - 20
Termination IDC
Wire size 0.22 and 0.35 mm²
Insulation Ø max. 1.4 mm
Hardness of insulation Shore A 90° ± 5
Type of wire Solid, stranded
Temperature range -40°C ... +120°C (Sn)
Board thickness 1.00 ± 0.10 mm
Insert cycles ≤ 5
Max. angle of insert ± 3°
 
Electrical
Rated current 4 A (85°C / 0.35 mm²)
Rated voltage Pitch 2.5 mm: 32 V
Pitch 5 mm: 250 V
Dielectrical strength Fully assembled 2.5 mm: 1.4 kV
Partially assembled 5 mm: 2.8 kV
Insulation resistance > 109 Ω
Contact resistance < 10 m Ω
Air gap and creeping distances Pitch 2.5 mm: > 1 mm
Pitch 5 mm: > 3 mm
Tracking resistance CTI ≥ 400
Approvals LV 214
USCAR 2 (is planned)
 
Material
Contact Cu-alloying
Contact finishing Sn
Housing / Contact insulation PA natural

IDC housings

© 2020 STOCKO CONTACT