Pitch 4.2 mm

Connector system

S-FIT 4.20

Universal connector system for internal equipment wiring
Applicable as flying lead coupling, for panel mounting or for printed circuit board contacting
Available in a range of versions and materials
Crimp contacts are touch-protected into the housing located
Cable exit 180°

Mechanical
Positions	Single-row: 2 - 6 Dual-row: 2 - 24
Pitch	4.2 mm
Termination	Connector, Counter part: Crimp Headers: Solder
Wire size	0.22 - 0.48 mm² / AWG 24-22 0.50 - 1.00 mm² / AWG 20-18
Degree of pollution	II
Temperature range	-40°C ... +110°C

Electrical
Rated current	7 A
Rated voltage	250 V
Insulation resistance	> 10⁹ Ω
Contact resistance	< 10 m Ω
Air gap and creeping distances	≥ 3 mm
Tracking resistance	CTI ≥ 325^*
Surge category	II
Insulation group	III a^*
Dielectrical strength	3 kV
Approvals	UL / ULC E96569

Materials
Housing Material code -XXX-	001 = PA,UL 94V-0 002 = PA,UL 94V-2 003 = PA,UL 94V-2, glow wire resistant, GWT 750°C to IEC 60335-1
Colour of housing	natural, other colours on request
Contact	CuZn
Contact finishing	Sn